{"product_id":"matek-elrs-r24-p6-elrs-2-4ghz-pwm-receiver","title":"MATEK ELRS-R24-P6 ELRS 2.4GHZ PWM RECEIVER","description":"\u003cp\u003e\u003cspan\u003eELRS has quickly become one of the most popular link system choices for many pilots, and we are excited to bring Matek's lineup of these receivers to you.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eYou know it's quality when it's Matek!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCheck out our \u003ca title=\"Express LRS Collection for FPV Drone Racing and Freestyle sold by Pyrodrone\" href=\"https:\/\/pyrodrone.com\/collections\/happymodel-express-lrs\" data-mce-fragment=\"1\" target=\"_blank\" data-mce-href=\"https:\/\/pyrodrone.com\/collections\/happymodel-express-lrs\"\u003eExpressLRS Collection\u003c\/a\u003e, all our \u003ca href=\"https:\/\/pyrodrone.com\/collections\/receivers\" title=\"Receivers for FPV Drone Racing and Freestyle sold by Pyrodrone\" target=\"_blank\"\u003eReceivers\u003c\/a\u003e and the rest of our \u003ca title=\"Matek Products sold at Pyrodrone\" href=\"https:\/\/pyrodrone.com\/collections\/matek-products\" data-mce-href=\"https:\/\/pyrodrone.com\/collections\/matek-products\"\u003eMatek products!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eESP8285, SX1281\u003c\/li\u003e\n\u003cli\u003eAntenna connector: IPEX MHF 1\u003c\/li\u003e\n\u003cli\u003e6x PWM outputs\u003c\/li\u003e\n\u003cli\u003eSupport 2~8S VBat voltage sense\u003c\/li\u003e\n\u003cli\u003eRF Frequency: 2.4GHz (2400~2480MHz)\u003c\/li\u003e\n\u003cli\u003eTelemetry power: 12dbm\u003c\/li\u003e\n\u003cli\u003eReceiver output protocol: PWM\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput voltage: 4~9V DC @ “+” pad\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVoltage sense: 34V Max. @ “VBat” pad\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003ePower dissipation:  45mA(binding), 85mA(wifi mode)\u003c\/li\u003e\n\u003cli\u003ePCB size: 20mm x 18mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2g w\/ antenna\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x MATEK ELRS-R24-P6 ELRS 2.4GHZ PWM RECEIVER\u003c\/li\u003e\n\u003cli\u003e1x IPEX MHF1 Antennas. 15cm\u003c\/li\u003e\n\u003cli\u003eDupont 2.54 pins  \u003cstrong\u003e(Board is shipped unsoldered)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFirmware:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpressLRS 3.0 or newer,   DIY 2.4 GHz \/\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eDIY 2400 RX PWMP EX\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eExpressLRS wiki for PWM receiver, Click\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.expresslrs.org\/2.0\/hardware\/pwm-receivers\/\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMake sure Receiver and TX module both are running ExpressLRS 3.0 or newer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFlashing Information:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003eReceiver has ExpressLRS 3.0 preloaded with binding phrase “123456”,  the Receiver will never enter binding mode if using the traditional binding procedure.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003eYou need to reflash it with your binding phrase OR go into WebUI to set your binding phrase.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 id=\"flashing-via-wifi\"\u003eFlashing via Wifi\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDisconnect ESC and servos from receiver first.\u003c\/li\u003e\n\u003cli\u003ePower on receiver by 5V source. Receiver’s LED(Red) will blink slow at first, and after 20s, it should blink fast indicating it’s on Wifi Hotspot Mode.\u003c\/li\u003e\n\u003cli\u003eMore detailed steps,  pls refer\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.expresslrs.org\/2.0\/quick-start\/receivers\/rx-matek2400\/\" target=\"_blank\"\u003ethis page\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eTarget: \u003cstrong\u003eDIY 2.4 GHz \/\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eDIY 2400 RX PWMP EX\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 id=\"flashing-via-uart\"\u003eFlashing via UART\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eDisconnect ESC and servos from receiver first.\u003c\/li\u003e\n\u003cli\u003eWire the receiver into the USB-TTL adapter, with TX on receiver connected to the Rx on the USB-TTL, and RX on receiver connected to the Tx of the USB-TTL. Wire 5V and GND of the USB-TTL to 5V and GND of the Receiver.\u003c\/li\u003e\n\u003cli\u003ePress the boot button while powering on the receiver, then release – the Red LED on receiver should now be solid.\u003c\/li\u003e\n\u003cli\u003eSelect the target \u003cstrong\u003eDIY 2.4 GHz \/\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eDIY 2400 RX PWMP EX \u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand  “\u003cstrong\u003eUART\u003c\/strong\u003e” for Flashing Method,  set your bind phrase and \u003ca href=\"https:\/\/www.expresslrs.org\/2.0\/quick-start\/firmware-options\/\"\u003eFirmware Options\u003c\/a\u003e and once done, click on \u003cstrong\u003eBuild and Flash\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003col\u003e\u003c\/ol\u003e","brand":"Matek","offers":[{"title":"Default Title","offer_id":68258425077997,"sku":"N7-11157","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0827\/5410\/9677\/files\/ELRS-R24-P6_3.jpg?v=1794370518","url":"https:\/\/primegrit.store\/products\/matek-elrs-r24-p6-elrs-2-4ghz-pwm-receiver","provider":"VELORA","version":"1.0","type":"link"}