{"product_id":"micoair-lr900-p-890-915mhz-1000mw-30dbm-data-transmit-module-for-pixhawk-ardupilot-px4-30km-long-range-lora-telemetry-radio","title":"MicoAir LR900-P 890-915MHz 1000mW 30dBm Data Transmit Module For Pixhawk Ardupilot PX4 30KM Long-Range LoRa Telemetry Radio","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eLR900-F\/P\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTelemetry Radio is a small, cheap radio with superior performance for flight controller that typically allows ranges of better than\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e30kilometers\u003c\/strong\u003e. And it is very suitable for\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ePixhawk\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor other\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAudupilot\/PX4\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eflight controller. It will connect automatically when power up without any configuration unless you need to implement some special features.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 0, 0);\"\u003e\u003cstrong\u003eThe LR900-F\/P works in the 915MHz, so is better to use 2.4GHz receiver than 915MHz receiver (BlackSheep\/ELRS 915) on your drones.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan\u003eCheck out all our \u003ca href=\"https:\/\/pyrodrone.com\/collections\/receivers\" target=\"_blank\"\u003eExternal Modules\/Receivers Collection\u003c\/a\u003e, and\u003c\/span\u003e the rest of our \u003ca title=\"BetaFPV Products for FPV Drone Racing and Freestyle sold by PyroDrone\" href=\"https:\/\/pyrodrone.com\/collections\/betafpv-products\" target=\"_blank\" data-mce-href=\"https:\/\/pyrodrone.com\/collections\/betafpv-products\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/pyrodrone.com\/collections\/micoair-products\" title=\"MicoAir Products for FPV Drone Racing and Freestyle sold by PyroDrone\" rel=\"noopener\" target=\"_blank\" data-mce-href=\"https:\/\/pyrodrone.com\/collections\/micoair-products\"\u003eMicoAir Products\u003c\/a\u003e! \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2778\/6650\/files\/DSC01360_2-1024x767.webp?v=1730408461\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2778\/6650\/files\/DSC01367_2-jpg.webp?v=1730408462\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2778\/6650\/files\/Radio-jpg.webp?v=1730409578\" alt=\"\"\u003e\u003c\/h3\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003c\/strong\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks in\u003cspan\u003e \u003c\/span\u003e\u003cb\u003e915MHz (890-915MHz)\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eSmall size and light weight (8g)\u003c\/li\u003e\n\u003cli\u003eTransmit power up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e1000mW (LR900-P)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBase on\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eLoRa\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emodulation technology to obtain excellent\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eanti-interference\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eperformance\u003c\/li\u003e\n\u003cli\u003eFrequency hopping spread spectrum (FHSS)\u003c\/li\u003e\n\u003cli\u003eUsing\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003etransparent transmission\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto compatible with any data and protocol not just mavlink\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCP2102\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUSB to UART IC, compatible with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eQGroundControl\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eon Android\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eData Transmission\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmission Rate:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e2.1K Byte\/s (default); 1.1K Byte\/s; 0.4K Byte\/s; 3.2K Byte\/s(down) 1.6K Byte\/s(up) in FHSS mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Single-package Length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e20K Byte\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUart Baudrate for JST-GH Interface:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e9600; 19200; 38400; 57600 (default); 115200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUart Baudrate for USB Interface:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e57600 (default); 115200\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003ePhysical\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e43.4 x 25.8 x 11mm (without antenna)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e8g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2778\/6650\/files\/1_9b4ec46e-e53d-4360-b630-a5526f77d46c.png?v=1730407535\"\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eElectrical\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5V DC (from USB or JST-GH)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAverage Transmit Current:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e200 mA at 27dBm (LR900-F) \/ 400mA at 30dBm (LR900-P)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Interface:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3.3V UART JST-GH1.25-4P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Interface:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUSB-Type-C (CP2102)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna Interface:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSMA (Female)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2778\/6650\/files\/2_f4fc0fcf-6ae6-4958-9d21-107c0c9770a6.webp?v=1730407570\"\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003c\/strong\u003eManual:\u003c\/h3\u003e\n\u003cp\u003eLR900-F\/P will automatically bind and connect to each other after powering on with default setting, the green LED will always on when connection has completed. It can be used for communication between flight controller and ground station software (Mission Planner or QGroundControl) without any settings.\u003c\/p\u003e\n\u003cp\u003eIf some parameters of LR900-F\/P needs to be changed, the MicoAisstant helps.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDownload the MicoAssistant and Driver\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/micoair.com\/downloads\/\"\u003eMicoAssistant\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/micoair.com\/download\/3391\/\"\u003eCP2102 Driver (WIN7\/10\/11)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFollow the tutorial to install the CP2102 driver in windows.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/micoair.com\/index.php\/2024\/03\/31\/installation_guide_for_cp2102_driver_step_by_step\/\"\u003eInstallation Guide for CP2102 Driver Step By Step – MicoAir Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eAfter the driver installation is finished, connect the LR900-F to the PC via USB, open the device manager and remember the port number, will need it later.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2778\/6650\/files\/3_dda4b139-e94c-47f1-9187-62e88605f834.webp?v=1730407684\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eSetup\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eOpen the MicoAssitant, choose the correct port number of the radio, click “connect” button with baudrate “57600”.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2778\/6650\/files\/4_c511d3b1-335c-4883-976e-85b83ce58307.webp?v=1730407734\"\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eNothing will happen until you click the “Radio” button.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2778\/6650\/files\/5_9f3d4ef5-5935-4465-a44a-2cf586bf1d6e.webp?v=1730407755\"\u003e\u003c\/strong\u003eClick the “Radio” icon to open the Radio Setup Page, this will only happen when radio elemetry module has correctly connneted to PC and the driver has been installed.\u003c\/p\u003e\n\u003cp\u003eYou need to click\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e“READ“\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ebutton to refresh the params on the first time. Modify the parameters according to your needs，and then click\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e“WRITE”\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ebutton to write it into module. The new parameters will take effect after re-power on.\u003c\/p\u003e\n\u003cp\u003eNote that once the baudrate is modified, the new baudrate needs to be used the next time you connect.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eParameter Description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eMODE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDUPLEX\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(default): Bidirectional communication mode. In this mode, both telemetry can communicate with each other, and only 1-to-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBROADCAST_TX\u003c\/strong\u003e: In this mode, the telemetry can only send data, usually use in RTK base station.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBROADCAST_RX\u003c\/strong\u003e: In this mode, the telemetry can only receive data, usually use in RTK rover station.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRATE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLOW\u003c\/strong\u003e：0.4K Byte\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMID\u003c\/strong\u003e: 1.1K Byte\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHIGH\u003c\/strong\u003e: 2.1K Byte\/s (3.2K\/s down and 1.6K\/s up in FHSS mode)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOnly high-speed mode is recommended for flight controller.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCHAN_MODE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMANUAL\u003c\/strong\u003e: In this mode, need to setup the working frequency manually, 890-915MHz, 1MHz step.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUTO\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e(default): In this mode, it will work in a frequency automatically with lowest interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFHSS_GROUND\u003c\/strong\u003e: FHSS mode for the radio telemetry which connect to PC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFHSS_AIR\u003c\/strong\u003e：FHSS mode for the radio telemetry which connect to flight controller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003e\u003cspan\u003eADDR\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAddress parameter has a range of 1-30000, and default vaule is 1000, telemetry module can only communicate with each other with the same address value.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eCHANNEL\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis parameter can only be set in the “MANUAL” CHAN mode, with a range of 0-25, corresponding to 890-915MHz.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBAUDRATE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBaudrate for the JST-GH port, 9600-115200 can be set, and 57600 is default.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUSB_BAUD\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBaudrate for the USB port, can only be set to 57600 (default) or 115200.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"elementor-heading-title elementor-size-default\"\u003e\u003cstrong\u003e\u003cem\u003e\u003ca href=\"https:\/\/micoair.com\/setup_tutorial_of_telemetry_radio_on_ardupilot\/\"\u003eSetup Tutorial Of Telemetry Radio On Ardupilot\u003c\/a\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"elementor-heading-title elementor-size-default\"\u003e\u003ca href=\"https:\/\/micoair.com\/setup_tutorial_of_telemetry_radio_on_px4\/\"\u003e\u003cstrong\u003e\u003cem\u003eSetup Tutorial Of Telemetry Radio On PX4\u003c\/em\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eConnecting Ardupilot to Mission Planner Over LR900 Telemetry Radio\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSTEP-1 \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eConnect LR900 To Flight Controller\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eConnect the LR900-F telemetry to the flight controller’s serial port, usually\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eTELEM1\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eor any other free. Note that the Tx of the LR900-F needs to be connected to the Rx of the flight controller, the same way Rx connect to Tx.\u003c\/p\u003e\n\u003cp\u003eOn the\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ePixhawk1\/2\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ePixhawk4\/5\/6\u003c\/b\u003e, you can use the cable supplied with LR900 to connect directly.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2778\/6650\/files\/1_01f96464-240c-4eac-8e59-ba0d99e5f901.webp?v=1730407986\"\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSTEP-2\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eConfigure the controller\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe flight controller should first be connected to the computer via USB, and check some initial configurations of it on Mission Planner.\u003c\/p\u003e\n\u003cp\u003eSince the LR900 is connected to the TELEM1, we need to confirm the following settings:\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSERIAL1_BAUD=57600\u003c\/b\u003e(default baudrate of LR900),\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eSERIAL1_PROTOCOL=MAVLink1\/2\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eIf the version of\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eArdupilot \u0026lt; 4.4.0\u003c\/b\u003e, you may also need to set\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eBRD_OPTIONS=3\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eto disable MAVftp.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2778\/6650\/files\/2_4f4a4b8e-7e98-4741-9993-a91ebc04ba0e.webp?v=1730408025\"\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSTEP-3\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eInstall Driver\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCP2102 is a USB to UART IC from Silicon Labs and used in LR900-F.\u003c\/p\u003e\n\u003cp\u003eConnect the LR900-F to PC via USB. In the device manager it will show “\u003cb\u003eCP2102 USB  to UART Bridge Controller\u003c\/b\u003e” which means that your PC has detected the drivers but note the “!” sign which indicated cp2102 drivers have not been installed.\u003c\/p\u003e\n\u003cp\u003eFollow our tutorial to install the driver for CP2102.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/micoair.com\/installation_guide_for_cp2102_driver_step_by_step\/\"\u003eInstallation Guide for CP2102 Driver Step By Step – MicoAir Tech\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2778\/6650\/files\/3_0e61bda6-a0c6-41e5-bae5-5106696e4711.webp?v=1730408053\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSTEP-4\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf everything goes well, the green LED on both module will stay on, indicating that a connection has been established with each other.\u003c\/p\u003e\n\u003cp\u003eOpen the Mission Planner, select the correct port and baudrate (default 57600) in the upper right corner, and then click Connect. It will connect to the flight controller and start reading the parameter lists.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2778\/6650\/files\/4_2ace0e13-4af0-4259-851f-c4d7546d1384.webp?v=1730408088\"\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLR900-P Telemetry Radio Module * 2\u003c\/li\u003e\n\u003cli\u003e2 x Antennas\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x wires set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MicoAir","offers":[{"title":"Default Title","offer_id":68258019573997,"sku":"I4-13763","price":87.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0827\/5410\/9677\/files\/DSC01070_2-1024x1024.jpg?v=1794367328","url":"https:\/\/primegrit.store\/products\/micoair-lr900-p-890-915mhz-1000mw-30dbm-data-transmit-module-for-pixhawk-ardupilot-px4-30km-long-range-lora-telemetry-radio","provider":"VELORA","version":"1.0","type":"link"}